STEPS TO UPGRADE ALPHABOX AND OPENBOX Z5 MINI AND GSKY
The best and save method is U-BOOT UPGRADE METHOD by following steps.
Copy the software to flash drive or memory card
Insert usb drive or memmory card into your deoder
Reboot or power off and on, and hold on OK button for about 5seconds till you see blue picture or the front panel of the decoder start counting, remove your hand from OK button.
Wait till upgrade finish after 2-3 minutes, immediately remove the flash drive or memmory card from your decoder when it reboot itself.
Press exit to the screen and scan the channels back and wait for about 30seconds to bring picture.
GSKY STEPS:– Press menu—–tools—–USB Upgrade, press OK button, then locate the file.bin and press OK button on START UPGRADE.
The best and save method is U-BOOT UPGRADE METHOD by following steps.
Copy the software to flash drive or memory card
Insert usb drive or memmory card into your deoder
Reboot or power off and on, and hold on OK button for about 5seconds till you see blue picture or the front panel of the decoder start counting, remove your hand from OK button.
Wait till upgrade finish after 2-3 minutes, immediately remove the flash drive or memmory card from your decoder when it reboot itself.
Press exit to the screen and scan the channels back and wait for about 30seconds to bring picture.
GSKY STEPS:– Press menu—–tools—–USB Upgrade, press OK button, then locate the file.bin and press OK button on START UPGRADE.
No comments:
Post a Comment