Sunday, 26 November 2017

rs232 cable softwares




1.download 232 Recovery Guide Boot
link here... UART Upgrade Tool v2.1.1.109_2 (1).zip


full information about operation in this file... UartLoader (5).doc
how to use
Recovery Guide Boot This loader supports updating via the RS232 port, even if broken bootloader.

1. Make sure that the receiver is disconnected from the power supply (via the switch on the rear panel) and connected to a computer via an RS232 port. 
2. Download the boot loader and the latest software 
3. Unpack the archive UARTLOADER.zip at any place 
4. Change the name of the software on rom.bin and place the file in the unzipped folder UARTLOADER, where file ConsoleDown v1.3.3.11.exe 
5. Opening the file with notepad ConsoleDown.bat you will see the default settings - "ConsoleDown_v1.3.3.11.exe-f. \ Rom.bin-c 3-i 1512-b 115200 \ n pause".
You need to change the "-c 3" which is the number of COM ports in your system. Set the desired number of the COM port. The default is No. 3. 
6. After confirming the settings, save the file. Then run the modified file ConsoleDown.bat.

No comments:

1 TO 250 LED & LCD REPAIR CLICK LINK DATA 251 TO 500 LED & LCD REPAIR CLICK LINK DATA 551 TO 750 LED & LCD REPAIR CLICK LINK DAT...